All NEW Vertx and V10 trolleys purchased after 12th January 2026 will come with new firmware SGr02t_06 pre-installed, and use these charging instructions.
If you purchased a Vertx or V10 before 12th January 2026, the handset firmware can be updated. Please contact info@stewartgolf.com, and our customer care team will arrange this update free of charge.
The easiest way of knowing if you have the newest firmware is to check if the green led flashs when on charge, if it does, you are on the newest firmware.
VERTX/V10 Handset Quick Start Guide
Charging
- Plug in the charging cable.
- Flashing green LED means the handset is charging.
- Solid green LED means the battery is fully charged.
Note:
- Reconnecting the cable after a full charge will NOT turn the LED back on.
- The Green LED will only flash again when charging after the handset has been used.
Using the Handset
- Flashing blue LED when the handset is turned on and not paired to a trolley.
- Solid blue LED when paired to a trolley.
Low Battery Warnings
- Flashing red and blue LED means battery is low. Charge after use.
- Solid Red means the battery is critically low. Charge immediately after use.
- Fast flashing red LED means battery is critically low. Handset is disabled, will not turn on, place handset on charge!
Note:
- If the LED is Solid Red and you turn the handset off, you won't be able to turn it on until recharged.