How To Replace Main Support Clip On Your Q Series/Vertx

Check out this helpful guide for replacing the Main Support Clip on your Q Follow, Q Remote, or VERTX Remote.

Please find video and instructions here https://youtu.be/OvG02C-CSjQ

Tools Needed:

• T20 Torx screwdriver

Steps:

*The upper assembly does not need to be removed from the trolley.

1. Remove the Screws:
   • Use the T20 Torx screwdriver to unscrew the seven screws at the back of the main support. Please see the attached image for reference. 
2. Remove the Spine Cover:
   • Lift off the spine cover once the screws are removed.
3. Remove the Rear Clip:
   • Detach the rear clip from its position.
4. Replace the Clip:
   • Install the new clip in the same position.
5. Reinstall the Spine Cover:
   • Place the spine cover back over the main support.
6. Reinsert the Screws:
   • Screw in the five T20 Torx screws to secure everything in place.