The accessory adapter allows you to attach compatible accessories to your trolley for convenient storage while on the course.
Step-by-step instructions:
- Locate the fitting point
On the side of the trolley handle, you will find a small protective cap covering the accessory mounting point. - Remove the protective cap
Carefully remove the cap from the side of the handle to expose the mounting hole. Keep the cap in a safe place in case you wish to remove the adapter in the future. - Position the accessory adapter
Align the accessory adapter with the exposed mounting hole on the handle. - Insert the fixing screw
Using the Allen key provided, insert the screw through the accessory adapter and into the handle. - Tighten to secure
Turn the Allen key clockwise until the adapter is firmly secured in place. Ensure it is tight enough so the adapter does not move, but avoid overtightening.
Once fitted, the adapter is ready to use and compatible accessories can be attached as required.
Please refer to the images below for a visual guide to the installation process.